Infinix Smart 10 Specifications Leaks – After the success of the Smart 9, Infinix is ​​now preparing to present its successor through the Infinix Smart 10. Despite targeting the low-cost smartphone segment, this device comes with some pretty interesting updates, although there are also some specification drops in several aspects.
Use Unisoc T7250
One of the biggest changes is in the engine sector. If previously Smart 9 used MediaTek Helio G81, this time Infinix switched to Unisoc T7250. However, in terms of performance, both are relatively equal because they both use a 2x Cortex-A75 + 6x Cortex-A55 CPU configuration.
More Read
The Unisoc T7250 itself is a chipset that is also used in several other cheap smartphones, such as the Poco C71 and Redmi A5, so don’t expect too much of a significant increase in performance. But the good news is the RAM capacity has been increased to 6GB, making multitasking feel smoother than its predecessor.
Slightly Updated Screen and Design
On the front, the Infinix Smart 10 retains the 6.67-inch display with HD+ resolution and a 120Hz refresh rate, which is quite impressive for its price class. This screen still carries the current punch-hole design.
Meanwhile, the rear has undergone a slight design change, especially the camera bump, which now looks more modern. Unfortunately, the main camera resolution has dropped from 13MP to 8MP, which could be a concern for users who prioritize photography.
Battery and Additional Features
For endurance, the 5,000mAh battery is still maintained, but now supports 15W fast charging, up from 10W in the previous generation. Other features, such as a fingerprint sensor on the side of the body, stereo speakers, and an 8MP selfie camera, will most likely remain.
